Sunday, August 2, 2020

222 MHz and UP 2020 Weekend

Sunday, August 2, 2020; COVID-19 Virus is once again on an exponential rise, plaguing the nation.  Social distancing is the order of the day.  Still, Herbert AF4JF, Ron KO0Z, Debbie KC9ULA and Harry WA0CNS ventured out this morning to practice some "radio activity" while still maintaing social distancing.

Herbert, Ron and Debbie went to Eagle Roost at Pere Marquette State Park near Grafton, IL EM48rx and Harry went to High Ridge, MO in EM48rl, a distance of almost 35 miles.  Herbert, Ron and Debbie were on the road by 7:00 am and crossed over the Mississippi River into IL via the Grafton Ferry boat.  By 8:40 am we were QRV.  At 9:16 am, Ron made a two-way CW 10 GHz QSO with Harry.  Right after that we made a two-way SSB 10 GHz QSO.  S-9 signals both ways, both times! 

Next on the agenda, Herbert using a BBQ dish antenna and his PLUTO SDR transceiver made could hear Harry's 2.3 GHz SSB signal!  After a little tuning, Harry was able to copy Herbert's 2.3 SSB 10 milliwatt signal with his downconverter and IF rig!  AF4JF then put in a 1-2 watt amp and both stations copied each other's SSB signals with 5 X 7 reports.

AF4JF then made a 1.2 GHz two-way QSO with WA0CNS with 10 milliwatts and a WA5VJB PC log periodic antenna!

By 10:30 am we finished packing up and we were on our way back to St. Charles.  Herbert went back via the ferry boat and Ron and Debbie continued southward on the Great River Road, enjoying the scenic view, towards Alton before taking Hwy 367 back to I 270.

Not a bad way at all to get some exercise, some radio and still social distance during the pandemic. It was great "seeing" (hearing) everyone today!                  



Herbert AF4JF making a 2.3 and 1.2 GHz Q with Harry WA0CNS 35 miles away.


    The white box near the tripod is Herbert's 1 to 2 watt multiband amplifier.




          Ron KO0Z's 10 GHz dish aimed south towards High Ridge and Harry WA0CNS 35 miles away.



                              Darcy is used to microwaving with Herbert!



               Herbert AF4JF tuning in Harry WA0CNS with his PLUTO SDR


                     
                             Herbert's PLUTO SDR





          Debbie KC9ULA and Toula waiting patiently.




             Herbert's 2.3 and 1.2 GHz set-up.  Ron's 10 GHz rig is pointed towards EM48rl.



                    Crossing the Mississippi River with a toe boat and barge in the channel.


                          Ferry boat landing in Missouri.


                                           Herbert waiting to board the Grafton Ferry



Harry WA0CNS in EM48rl, High Ridge, MO.  We made 10, 2.3 and 1.2 GHz two-way Qs, 35 miles!



                                                   EM48rl hitch hiker


                    This chap is attracted to KO0Z or he's an Illini fan, orange and blue colors!



Herbert summed up today's outing with this email:

Ron and Harry,

Thanks for coming out with me on such short notice! I wasn't sure until Friday evening if I will find the time .. I am glad that I did.

What I wanted to test today was:

- if Harry will copy me and if I copy him on the PCB antenna on 2.3/3.4 GHz .. negative, this didn't work on 2.3GHz so we didn't even try on 3.4GHz

- if Harry will copy me and if I copy him on the BBQ dish antenna without PA .. positive, this worked both ways

- if Harry will copy me using the LUXUL PA/preamp unit ... positive, this worked. RX preamp was fine, but TX needs adjustment of driving power

- if Harry will copy me and if I copy him on lower microwave bands (903/1296MHz) using the PCB antenna ... positive, we made 2-way QSO on 1296. Wow!


These results gave me an idea what I need to put in the box with SDR PLUTO to make it multi-band rover transceiver with as simple band switching as possible. 

73 Herbert